Filter
Top Products
Adjustment tips and functions
29
Displaying the software revision
You can display the current software revision of the receiver.
̈ For information on software updates, visit the EM 2000 product page on our website at
www.sennheiser.com.
The “Sync Settings” submenu
Via the “SK Settings”, “SKM Settings” and “SKP Settings” menu items, you can set the trans-
mitter parameters directly on the receiver and activate or deactivate the transfer of these
parameters to the transmitter:
By pressing the button ¿
, you can transfer the parameters to the transmitters via the
infra-red interface (see page 15).
Tune
Guitar Tuner
Sync Settings
Pilot Tone
Warnings
LCD Contrast
Reset
IP-Address
Software Revision
Exit
Advanced Menu
Display Function
SK Settings Calls up “SK Settings”
SKM Settings Calls up “SKM Settings”
SKP Settings Calls up “SKP Settings”
Exit Exits the “Sync Settings” submenu and returns to the extended menu
“Advanced Menu”
SK Settings
SKM Settings
SKP Settings
Exit
Sync Settings
Setting Transfer is ...
... activated
... deactivated
Display Function Settings
Sensitivity Adjusts the input sensitivity:
SK –60 dB to 0 dB,
adjustable in steps of 3 dB
SKM and SKP –48 dB to 0 dB,
adjustable in steps of 6 dB
Low Cut (SKM only) Low cut filter
/
Auto Lock Lock mode Inactive, Active
Mute Mode (SK, SKP only) Mute mode Disabled, RF On/Off, AF On/Off
RF Power Transmission power Low, Standard, High
PhantomPower48V (SKP only) Phantom powering Inactive, Active
Cable Emulation (SK only) Emulates guitar cable
capacities
Minimum, Low, Medium, High
Sensitivity
-60 dB
Sync
PEAK
-10
0
40
30
20
10
-20
-30
-40
AF
RF
Sensitivity
-60 dB
Sync
PEAK
-10
0
40
30
20
10
-20
-30
-40
AF
RF