Filter
Top Products
15
SWITCHING THE DSP-360 ON / OFF
To switch the DSP-360 on, press this button
for a short time. Please press for a longer
time to switch it off (approx. 2 seconds).
SELECTING THE OPERATING MODE
„SPEAKER“: The virtual Dolby Surround
sound is switched through to the
loudspeakers via your receiver.
„HEADPHONE“: The virtual Dolby Surround
sound can only be heard via the connected
headphones; the loudspeakers are switched off.
„BYPASS“: The DSP processor is switched
off and the sound passes through unchanged
(loudspeakers in operation).
̄ and ̆: Volume adjustment for connected
headphones.