Wireless RS 65-7
English
Wireless RS 65
Thank you for choosing Sennheiser! Over half a century of accumulated expertise in
the design and manufacture of high-quality electro-acoustic equipment have made
Sennheiser a world-leading company in this field. We have designed this product to
give you reliable operation over many years.
Please take a few moments to read these instructions carefully, as we want you to
enjoy your new Sennheiser product quickly and to the full.
System components and connections
- 1 receiver HDR 65
- 1 transmitter T 60
- 2 rechargeable batteries BA 151
- 1 power supply
- 1 mini jack plug 3,5 mm with adapter to 1/4“
6,3 mm (925 MHz jack to 2x phono plug)
- instructions for use
Establish the necessary connections.
Charge the accupack for 24 hours before you use it
for the first time! (Please refer to the section
Charging the accupack.)
Where to place the transmitter
Choose a suitable place near your hi-fi system
or TV set.
Do not place the transmitter close to metal
objects such as shelf bars, reinforced concrete
walls, etc.
The transmitter features a convenient automatic
on/off function. The transmitter is switched on by
the audio signal. If there is no audio signal for
about 3 minutes, the transmitter automatically switches off. The transmitter is now
in stand-by mode, its power consumption is very low so that it can remain connected
to the mains. Accupacks can always be recharged when the transmitter is connected
to the mains.
Switching the headphone receiver on
The O
N/OFF switch is on the right earpiece.
Switching the headphone receiver off
Make sure to switch off the headphones after each
use and store the headphones in the transmitter’s
charging compartment to avoid discharging the
accupack.
RS65.book Seite 7 Dienstag, 18. Mai 2004 2:09 14