Filter
Top Products
14
Using the Set 840-TV system
Adjusting the volume
Searching for a sound source
̈ Put the receiver on.
The receiver automatically searches for one of the
3 channels of the transmitter and starts the channel
search on the last selected channel. If a channel is found,
the channel search stops.
Your hear the sound of the sound source found.
Depending on the channel found, the receiver produces
1, 2 or 3 beeps (see page 22) and the channel
indicator 1 on the receiver lights up as follows:
̈ Use the volume control 2 to
adjust the volume to a sufficient
and comfortable level.
The channel indicator 1 goes off after 30 seconds so
that the light won’t disturb you in a dark room.