Filter
Top Products
Getting Started14
Getting Started
1
Wireless speakers
connection
1. Insert the Wireless TX till the marked line into
the WIRELESS connector on the rear of the unit.
Line
2. Connect the power cord of the wireless receiver
to the outlet.
3. When you turn on the player, the wireless
speakers connection will be completed
automatically.
-
When the connection is completed, you can
see the icon ( ) on the display window.
LED indicator of wireless receiver
LED Color Operation
Yellow
(Blink)
The connection is not completed.
Yellow The connection is completed.
Red
The connection is in standby
mode or failed.
O
(No display)
The AC power cord is unplugged.
y
Do not insert other than the Wireless TX
dedicated for this unit into the WIRELESS
connector. This unit might be damaged or it
may not be removed easily.
y
If there is a strong electromagnetic wave
product nearby, interference may occur. Put
the unit (wireless receiver and main unit)
away from there.
y
It takes a few seconds (and may take longer)
for the Wireless TX and the wireless receiver
to communicate with each other.
y
The available range is 20 m for wireless
connection in an open place.
,
Note
Wireless speakers connection,
manually
You can set up wireless speakers connection
manually, when your connection is not completed.
Refer to the “Connect wireless speakers” on page 31.