Scotts SMV300 CD Player User Manual


 
10
During CD playback, if you wish to
pause the disc momentarily, press
the PLAY/PAUSE ( ) button
again. Playback stops but the disc
continues to spin and the elapsed
time flashes in the CD Display.
1
Press the PLAY/PAUSE ( )
button again to release Pause
and resume normal CD playback.
The sound returns and the
elapsed time stops flashing.
2
After you insert the disc into the CD
player and the total number of
tracks/elapsed time appear on the
display, you may press either the
TUNING/SKIP/ SEARCH ( ) or
( ) button to select a specific
track for playback.
1
When the desired track number
appears in the display, press the
PLAY/PAUSE ( ) button.
Playback will begin on the track
you selected.
2
You can also directly select tracks
by using the Number buttons on
the remote control. Once selected,
they will automatically play. If
selecting a track over 9, press the
+10 button repeatedly until the
desired first digit appears. For
example, to select track 22, press
the +10 button twice, and the
“2” Number button .
2
1
3
CD PAUSE CONTROL
TO BEGIN PLAYBACK FROM A SPECIFIC TRACK
During playback, depress and hold
either the TUNING/SKIP/ SEARCH
( ) or ( ) button to move the
player forward or backward within
a track to locate a specific musical
passage. The player will move
forward or backward at high speed
as long as the buttons are
depressed. When you release the
TUNING/SKIP/ SEARCH ( ) or
( ) button, normal playback will
resume at that point.
During playback, press the
TUNING/SKIP/ SEARCH ( )
button once to advance the player to
the beginning of the next track. Press
the TUNING/SKIP/ SEARCH ( )
button repeatedly to advance the
player to higher number tracks.
1 3
During playback, press the
TUNING/SKIP/SEARCH ( )
button once to move the player back
to the beginning of the previous
track. Press the TUNING/SKIP/
SEARCH ( ) button repeatedly to
move the player back to lower-
numbered tracks.
2
FORWARD/REVERSE SKIP TRACK AND HIGH-SPEED MUSIC SEARCH ( / )
SMV300 O/M.QXD 6/21/01 7:46 AM Page 10