Filter
Top Products
11Rack LCD Console User Manual
Monitor settings
Note: See “EXIT” on page 10 for information on setting the auto-adjust feature.
USB Peripheral Devices
The front panel USB port is available to connect a USB peripheral device (flash drive, CD-ROM drive,
mouse, etc.) to the target device (KVM switch or server) using the pass-through USB port on the back of
the Rack LCD Console.
The front panel USB port will recognize a USB peripheral device when it is inserted. If a mouse is
subsequently used in that port, use the hotkey combination Ctrl + Enter to reset the port so it will
recognize the mouse.
Setting Explanation
Brightness Adjust the brightness level of the screen.
Contrast Adjust level of color difference between foreground and background colors.
Phase Adjust the phase setting of the screen so that no dark horizontal bands are visible.
Clock Adjust the clock setting of the screen so that no dark vertical bands are visible.
H-Position Moves the display area left or right.
V-Position Moves the display area up or down.
Color Hue Adjusts the color quality of the display. The Adjust Color selection has a submenu that allows fine
tuning of RGB values.
Language Select the language in which the OSD displays menus.
OSD Duration Adjust the number of seconds before the On Screen Display shuts down due to inactivity.
Reset Resets all menus (except language) and submenus to factory default settings.