Samsung SDSM-EX Home Theater System User Manual


 
77
Operating a TV with the Remote Control
The remote control may not work on some brands of TVs. Also some operations may not be
possible depending on your brand of TV.
If you do not set the remote control with the code for your brand of TV, the remote control will
work on a Samsung TV by default.
When operating a TV with the remote control
1
Press the MODE button to make the TV
indicator on the remote control flash.
2
Press POWER button to turn on the TV.
3
Point the remote control toward the TV.
4
While holding down POWER, enter the
code corresponding to your brand of TV.
If the code matches the TV's code, the TV will be turned off.
If there is more than one code listed for your TV in the table,
enter one at a time to determine which code works.
Example: For a Samsung TV
While holding down POWER, use the number buttons to enter 00,
01, 02, 03, 04, and 05.
You can use the TV POWER, VOLUME, CHANNEL, and Numeric
buttons (0~9).
5
Point the remote control toward the TV and
press POWER. If the TV turns off or on,
the setting is complete.
TV
DVD RECEIVER
Note
49P~84P(P1200)-SECA GB 6/22/05 6:57 PM Page 78