Samsung HTQ45 Stereo System User Manual


 
173
A2 Verifywhetherthesamenetworkkey(encryption
key)has been enteredforboththeAP andthe
computer.Thenetworkkeyisanencryptionkeyfor
encryptingthedatatransmittedbetweentheAPand
the computer. It is recommended setting the network
keymanually.
Check the AP Settings
FortheAPsettings,refertotheUserGuideprovided
bytheAPmanufacturer.
A3 Verifywhethertheenvironmentissuitableforusing
awirelessLAN.TheuseofawirelessLANmaybe
restricted according to the environment and distance.
Obstaclessuchaswallsordoorsaffecttheuseof
awirelessLAN.InstalltheAPinahighandopen
space,50cmfromthewallandfarremovedfromany
otherradiosignalsources.
A4 VerifywhethertheAPisoperatingproperly.
● WhentheAPisnotoperatingnormally,turnoff
theAP,waitashortwhile,andturnitonagain.
● VerifywhethertheAP’sfirmwareisthe most
recentversion.(ContacttheAPmanufactureror
theplacewhereyoupurchasedtheAPfordetails
oftheAPrmware.)
A5 VerifywhethertheAPhasbeenproperlyconnected
to thenetwork. Verifywhether the network is
operatingnormallybyconnectingthewirednetwork
cable,whichhasbeenconnectedtotheAP,toyour
computer.
A6 Check the network key settings (encryption
key)again. Whenautomaticcode conversion (a
passphrasefunction)hasbeenselectedanddata
communicationisnotfunctioningevenwithanormal
wirelessconnection,itisrecommendedenteringthe
networkkey(encryptionkey)manually.
A7 ChecktheAPsettingsasfollows.(Thefollowingis
recommended for a standard environment and thus
maydifferaccordingtothespecicwirelessnetwork
environment.)
● WhenseveralAPsarepresentsimultaneously,
checkthechannelsettingsforeachAP.When
differentAPs are using nearby channels,
interferencemayoccurbetweentheelectronic
waves.SettheAPchannelsfurtherapartfrom
eachother.(Ex:Ch1,Ch5,Ch9,Ch13)
● WhenanAP’sSSID(ServiceSetID)optionisset
to“Hide”,youcannotsearchforthatAPonthe
computer.Werecommendunselectingthe“Hide”
optionfortheAP.TheSSIDisanameusedfor
distinguishingonewirelessLANfromanother
wirelessLAN.
● It is recommended using Long Preamble.
Preamble is a signalfordata transmission
synchronization. Short Preamble may be
supportedbysometypesofAPsbutmaycause
compatibilityproblems.
● ItisrecommendedusingastaticIP.
● Sincestaticchannelselectionismorereliable
thanautochannelselection,itisrecommended
usingastaticchannel.