Samsung HW-E450 Speaker System User Manual


 
10

You can use the wall mount bracket to mount this unit on a wall.
Do not hang onto the installed unit and avoid any impact to the unit.
Secure the unit rmly to the wall so that it does not fall off. If the unit falls off, it may cause
an injury or damage to the product.
When the unit is installed on a wall, please make sure that children do not pull any of the
connecting cables, as it may cause it to fall.
For the optimal performance of a wall mount installation, keep the speaker system at least
2 inches (5 cm) away from the TV.
connections

Install on a vertical wall only.
For the installation, avoid a location with high temperature or humidity, or wall that cannot sustain the
weight of the set.
Check the strength of the wall. If the strength of the wall is insufcient for the product installation, make
sure to reinforce the wall before the installation.
Check the material of the wall. If the wall is made of plaster board, marble, or iron board, purchase and
use the appropriate xing screws or mollys.
Connect cables from the unit to external devices before you install it on the wall.
Make sure the unit is turned off and unplugged before you install it. Otherwise, it may cause an electric shock.
1 2
2 inches (5 cm) or more
 Fit the unit into the corresponding slots of the wall mount
bracket. For secure installation, make sure the mounting
studs slide rmly down into the bottom of the slots.
 Place the wall mount bracket on a wall surface
and then
secure it with two screws (not supplied).
If you are hanging the unit below a TV, be
sure to install the
wall mount bracket so that the arrow (
) is placed in the
center of the TV.
Also make sure the unit is at least two inches (5 cm)
below the TV.

The installation is complete.