Filter
Top Products
44
Operation
USING THE SURROUND MODES
Using the SOUND EFFECT button on the front of the main unit
Selecting the SFE mode
Press the SOUND EFFECT button to select SFE.
Each time you press this button, SFE Æ DPLII will be selected in turn.
Press the UP/DOWN ( ,,. ) button.
Each time you press the
UP/DOWN ( ,,. ) button,
STEREO Æ HALL 1 Æ HALL 2 Æ J.CLUB Æ CHURCH Æ ROCK Æ CLASSIC Æ LIVE Æ
GAME Æ MOVIE Æ CONCERT Æ STADIUM will be selected in turn.
You can also select the SFE mode by pressing the DSP button on the remote control.
Selecting the DPLII mode
Press the SOUND EFFECT button to select DPLII.
Each time you press this button, SFE Æ DPLII will be selected in turn.
Press the
UP/DOWN ( ,,. ) button.
Each time you press the
UP/DOWN ( ,,. ) button, MUSIC Æ GAME Æ MATRIX Æ PL Æ
MOVIE will be selected in turn.
You can also select the DPLll mode by pressing the PROLOGIC button on the remote control.
You cannot use Dolby Pro Logic ll mode for multi channel signals such as Dolby Digital and DTS.
Pro Logic works only for BITSTREAM audio signals with sampling frequencies of 32KHz, 44KHz or
48KHz.
Using the S.DIRECT/STEREO button on the front of the main unit
Press the S.DIRECT/STEREO button.
Each time the button is pressed, the mode switches between the S. DIRECT mode and the STEREO
mode.
S.DIRECT : Outputs 2 CH PCM audio signal without any signal processing, providing higher audio
quality. This is useful for obtaining the best sound from a connected CD player.
STEREO : Outputs sound of the selected source in 2 CH stereo.
1.
•
2.
•
•
1.
•
2.
•
•
M
•
•
•
HW-C500-C560S-XAA_0609.indd 44HW-C500-C560S-XAA_0609.indd 44 2010-06-09 5:11:352010-06-09 5:11:35