Filter
Top Products
62
system setup
SETTING THE AV SYNC
Video may look slower than the audio if it is connected to a digital TV. If this occurs, adjust the audio delay time to
match the video.
In Stop mode, press the 1. MENU button.
Press the Cursor 2.
%
button to move to Audio and then press the
ENTER button.
Press the Cursor 3.
%
button to move to AV-SYNC and then press
the ENTER button.
Press the Cursor 4.
,
button to select the AV-SYNC Delay Time
and then press the ENTER button.
You can set the audio delay time between 0 ms and 300 ms. Set •
it to the optimal status.
d Press the RETURN button to return to the previous level.
d Press the EXIT button to exit the setup screen.
SETTING THE HDMI AUDIO
The audio signals transmitted over the HDMI Cable can be toggled ON/OFF.
In Stop mode, press the 1. MENU button.
Press the Cursor 2.
button to move to Audio and then press the
ENTER button.
Press the Cursor 3.
button to move to HDMI AUDIO and then
press the ENTER button.
Press the Cursor 4.
,
button to select ON or OFF and then press
the ENTER button.
• ON : Both video and audio signals are transmitted over the HDMI
connection cable, and audio is output through your
TV speakers only.
• OFF : Video is transmitted over the HDMI connection cable only,
and audio is output through the home theater speakers only.
d
Press the RETURN button to return to the previous level.
d
Press the EXIT button to exit the setup screen.
M
The default setting of this function is HDMI AUDIO OFF. `
HDMI AUDIO is automatically down-mixed to 2ch for TV speakers. `
When HDMI AUDIO is on,PRO LOGIC II /DSP EQ/P.BASS doesn't work. `
MOVE ENTER EXITRETURN
MOVE SELECT EXIT
RETURN
MOVE ENTER EXITRETURN
MOVE SELECT EXIT
RETURN