Filter
Top Products
54
system setup
SETTING THE AV SYNC
Video may look slower than the audio if it is connected to a digital TV. If this occurs, adjust the audio delay time to to
match the video.
In Stop mode, press the MENU button.
Press the Cursor
%
button to move to Audio and then press the
ENTER or
+
button.
Press the Cursor
%
button to move to AV-SYNC and then press
the ENTER or
+
button.
Press the Cursor $, % button to select the AV-SYNC Delay Time
and then press the ENTER button.
You can set the audio delay time between 0 ms and 300 ms. Set
it to the optimal status.
d Press the RETURN button to return to the previous level.
d Press the EXIT button to exit the setup screen.
SETTING THE HDMI AUDIO
The audio signals transmitted over the HDMI Cable can be toggled ON/OFF.
In Stop mode, press the MENU button.
Press the Cursor % button to move to Audio and then press the
ENTER
or
+
button.
Press the Cursor % button to move to HDMI AUDIO and then
press the ENTER or
+
button.
Press the Cursor $, % button to select ON or OFF and then press
the ENTER button.
ON : Both video and audio signals are transmitted over the HDMI
connection cable, and audio is output through your TV
speakers only.
OFF : Video is transmitted over the HDMI connection cable only, and
audio is output through the home cinema speakers only.
d
Press the RETURN button to return to the previous level.
d
Press the EXIT button to exit the setup screen.
The default setting of this function is HDMI AUDIO OFF.
HDMI AUDIO is automatically down-mixed to 2ch for TV speakers.
1.
2.
3.
4.
~
1.
2.
3.
4.
~
~
M
`
`
MOVE ENTER EXITRETURN
MOVE SELECT EXIT
RETURN
MOVE ENTER EXITRETURN
MOVE SELECT EXIT
RETURN
HT-X715_ELS_ENG_0421.indd 54 2008-04-23 �� 3:26:58