Filter
Top Products
39
When the button is pressed, a preset
broadcast station is selected.
Hold in the button. Automatic searching
begins, and then stops when a station is tuned in.
Press the button to tune to the chosen
station. The frequency changes incrementally in either
direction each time the corresponding button is pressed.
Listening to the Radio
Auto Station 1
Auto Station 2
Manual Station
Press the Tuner(Band)
button.
1
Select a broadcast station.
2
•
The selection toggles back
and forth between "FM" "MW"
and "LW" each time the
Tuner(Band) button is
pressed.
Press the MO/ST button. (only FM)
•
The selection toggles back and forth between “STEREO” and “MONO” each time the
MO/ST button is pressed.
•
In a poor reception areas, select Mono mode for a clear, interference-free broadcast.
To Listen in Mono/Stereo
Audio
MO/ST
Remote
Control
Unit
Press the Stop ( ) button to select the PRESET
mode. Then press the button to select a
station stored in the preset
Press the Stop ( ) button to select the MANUAL
mode on the front panel. Then hold in the
button to make the unit begin automaticall searching for
broadcast stations.
Press the Stop ( ) button to select the MANUAL
mode front panel. Press the button to tune
to the desired station. The frequency changes
incrementally in either direction each time the
corresponding button is pressed.
Auto Station 1
Auto Station 2
Manual Station
1
Select a broadcast station.
2
Main
Unit
Press the Function button to
select the desired band (FM,
MW or LW).
You can listen to the chosen band (FM, MW or LW broadcast stations) by using either
the automatic tuning or manual tuning operation.
DM150(GB)-noRDS 7/27/02 12:20 Page 39