Filter
Top Products
23
Disc Playback
2
Load one or more discs.
•
Place a disc gently into the tray with the disc’s label
facing up.
•
Depending on the content of the disc, the initial screen may appear different.
•
Depending on the recording mode, some MP3-CDs cannot be played.
•
Table of contents of a MP3-CD varies depending on the MP3 track format recorded on the disc.
•
To resume playback, press PLAY/PAUSE
button again.
1
Press OPEN/CLOSE button to open the
disc tray.
3
Press DISC SKIP button.
•
Rotate the carousel tray so you can load the third, fourth,
and fifth discs.
4
Close the compartment by pressing the
OPEN/CLOSE button again.
To temporarily pause playback,
press PLAY/PAUSE during playback.
DVD VCD CD
•
Playback starts automatically.
MP3 JPEG
•
Playback starts automatically.
•
If the TV is on, a list of MP3s on
the CD will appear on the TV
screen.
Something like you
Back for good
Love of my life
More than words
I need you
My love
Uptown girl
DVD RECEIVER SMART NAVI
•
If pressed once, “PRESS PLAY” is displayed and the
stop position will be stored in memory.
If PLAY/PAUSE ( ) button or ENTER button is
pressed, playback resumes from the stop position.
(This function works only with DVDs.)
•
If pressed twice, “STOP” is displayed, and if
PLAY/PAUSE ( ) button is pressed, playback
starts from the beginning.
To stop playback,
press STOP during playback.
Note
24
OPERATION
Selecting a Disc in the Disc changer
To select a specific disc, press the
corresponding DIRECT PLAY (1, 2, 3, 4, 5)
buttons on the front panel or DISC SKIP on the
remote control, until the required disc indicator
flashes.
The DVD/CD function is automatically selected when Disc Skip is pushed.
If you wish to play the current disc only, press
REPEAT on the remote control one or more times,
until “REPEAT : DISC” is displayed.
If the disc selected is not loaded, the next disc is
played automatically.
•
All the discs will be played in turn, starting with the one selected.