Filter
Top Products
34 English
English 35
04 Basic Functions
Using buttons on the Remote Control
Press the FUNCTION button to select FM.
Tune in to the desired station.
Preset Tuning 1 : You must rst add a desired
frequency as a preset. Press the STOP (@)
button to select PRESET and then press the
TUNING/CH( ) button to select the preset
station.
Manual Tuning : Press the STOP (@) button to
select MANUAL and then press the TUNING/CH
(
) button to tune in to a lower or higher
frequency.
Automatic Tuning : Press the STOP (@) button
to select MANUAL and then press and hold the
TUNING/CH(
) button to automatically
search the band.
Setting Mono/Stereo
Press the MO/ST button.
Each time the button is pressed, the
sound switches between STEREO and
MONO.
In a poor reception area, select MONO for a clear,
interference-free broadcast.
Presetting Stations
Example : Presetting FM 89.10 in the memory
Press the FUNCTION button to select FM.
Press the
TUNING/CH ( ) button
to select
<89.10>.
Press the TUNER MEMORY button.
Number ashes on the display.
Press the
TUNING/CH ( )
buttons
to select preset number.
You can select between 1 and 15 presets.
~
~
~
~
~
~
~
Press the TUNER MEMORY button again.
Press the TUNER MEMORY button before
number disappears from the display.
Number disappears from the display and the
station is stored in memory.
To preset another station, repeat steps 2 to 5.
~
~
HT-D450-XU-ENG-0303.indd 35 2011-03-05 �� 11:38:18