Filter
Top Products
24 English
English 25
03 Setup
Ideal Centre
Speaker placement
Df: The distance from Front Speaker
Dc: The distance from Centre Speaker
Dr: The distance from Rear Speaker
Place all speakers within this circle.
Ideal Rear
Speaker placement
Setting the Centre Speaker
If the distance of Dc is equal to or longer than the
distance of Df in the gure, set the mode as 0ms.
Otherwise, change the setting according to the table.
Distance
between
Df and Dc
0.00m 0.34m 0.68m 1.06m 1.40m 1.76m
Delay
Time
00 ms 01 ms 02 ms 03 ms 04 ms 05 ms
Setting the Rear Speaker
If the distance of Dc is equal to or longer than the
distance of Dr in the gure, set the mode as 0ms.
Otherwise, change the setting according to the table.
Distance
between
Dr and Dc
0.00m 1.06m 2.11m 3.16m 3.62m 5.29m
Delay
Time
00 ms 03 ms 06 ms 09 ms 12 ms 15 ms
NOTE
With PL II (Dolby Pro Logic II), the delay time
may be different for each mode.
With AC-3 and DTS, the delay time can be set
between 00 and 15mSEC.
The Centre channel is only adjustable on 5.1
channel discs.
✎
`
`
`
Test Tone
Settings
Move Select Return
Speaker Setting
Speaker Size
Sound Edit
Delay Time
Test Tone :
On ▶
Select Return
Use the Test Tone feature to check the speaker
connections.
Press the
_+
buttons to select ON.
The test tone will be sent to Front Left ➞ Center
➞ Front Right ➞ Rear Right ➞ Rear Left ➞
Subwoofer in order.
To stop the test tone, press the ENTER button.
DRC (Dynamic Range Compression)
This feature balances the range between the loudest
and quietest sounds. You can use this function to
enjoy Dolby Digital sound when watching movies at
low volume at night.
You can select either off, 2/8, 4/8, 6/8, Full
AV-SYNC
Video and audio sync may not match with digital TV.
If this occurs, adjust the audio delay time to
match the video
You can set the audio delay time between 0 mSec
and 300 mSec. Set it to the optimal status.
HDMI AUDIO
The audio signals transmitted over the HDMI Cable
can be toggled On/Off.
On : Both video and audio signals are transmitted
over the HDMI connection cable, and audio
is output through your TV speakers only.
Off : Video is transmitted over the HDMI
connection cable only, and audio is output
through the product speakers only.
~
~
~
~
~
~