Filter
Top Products
16 English
English 17
02 Connections
Installing the Speakers on the Tallboy Stand
* HT-C453 only - Front Speakers
* HT-C455 only - Front/Rear Speakers
Turn the Stand Base upside-down and connect
it to the Stand.
Insert four small screws clockwise into the four holes
marked using a screwdriver as shown in the
illustration.
Connect the upper Speaker to the assembled Stand.
Insert another large
screw
clockwise into the hole
on the rear of the speaker using a
screwdriver.
1.
2.
3.
4.
Connections
Stand
Stand
Base
Stand
Speaker
Connecting The Speakers
Press down the terminal tab on the back of the speaker.
Insert the black wire into the black terminal (–) and the red wire into the red
terminal (+), and then release the tab.
Connect the connecting plugs to the back of the product by matching the
colours of the speaker plugs to the speaker jacks.
Black
Red
In case of HT-C450
DIGITAL
AUDIO IN
OPTICAL
FM ANT .
HDMI OUT
AUX IN
COMPONENT
OUT
VIDEO
OUT
Front Speaker (R)
Subwoofer
Rear Speaker (R) Rear Speaker (L)
Front Speaker (L)
Centre Speaker
* Refer to page 16 for the speakers of HT-C453/C455.