Filter
Top Products
38
playback
USING THE BLUETOOTH
You can use a Bluetooth device to let you enjoy music with high quality stereo sound, all without wires!
What is Bluetooth?
Bluetooth is an new technology that enables Bluetooth-compliant devices to easily interconnect
with each other using a short wireless connection.
A Bluetooth device may cause a noise or malfunction, depending on usage.
When a part of the body is in contact with the receiving/transmitting system of the Bluetooth device
or the Home Theater System.
Electrical variation from obstructions caused by a wall, corner or office partitioning.
Electrical interference from same frequency-band devices including medical equipment, microwave
oven and wireless LAN.
Pair the Home Cinema System with the Bluetooth device while maintaining a close distance.
The further the distance is between Home Theater System and Bluetooth device, the worse the quality.
If the distance exceeds the Bluetooth operational range, the connection is lost.
The Home Theater System only supports Middle Quality SBC data(up to 237kbps@48kHz), and does
not support High Quality SBC data(328kbps@44.1kHz).
In poor reception-sensitivity areas, the Bluetooth connection may not work properly.
The Home Theater System has an effective reception range of up to 33 feet in all directions if there are
no obstacles. The connection will be automatically cut off if the distance is out of this range. Even
within this range, the sound quality may be deteriorated by obstacles such as walls or doors.
To connect the Home Theater System to a Bluetooth device
Check if the Bluetooth device supports the Bluetooth-compliant stereo headset function.
Press the FUNCTION button on the front panel of the home theater system repeatedly until the "BT
AUDIO" appears.
The mode switches as follows :
DVD/CD ➞ DIGITAL IN ➞ AUX 1 ➞ AUX 2 ➞ USB
➞ BT AUDIO ➞ TUNER
You will see “WAIT” for 2 seconds and then “READY”
on the front display of the Home Theater System.
Select the Bluetooth menu on the Bluetooth device you
want to connect. (refer to Bluetooth device's user manual)
Select a Stereo headset menu on the Bluetooth
device.
You will see a list of scanned devices.
Select "Samsung Home Theater" from the searched list.
When the Home Theater System is connected to the
Bluetooth device, the Home Theater System will display
"Connect" on the front display, followed by the name of
the connected Bluetooth device.
The Home Theater System connection is complete.
Play music on the connected device.
You can listen to the music playing on the connected Bluetooth device over the home theater
system.
You are not required to enter a PIN code (password) when connecting the Bluetooth device to the home theater
system.
~
~
~
~
~
~
~
~
~
1.
~
~
2.
3.
~
4.
~
~
5.
~
M
`
Connect
Bluetooth devide
02056S-HT-A100-XAC-ENG.indd 38 2008-03-18 �� 11:56:54