Filter
Top Products
English 57
04 Basic Functions
Playing Back a USB Storage Device
F
You can use the USB connection to play multimedia
fi les (MP3, JPEG, DivX, etc.) downloaded from a USB
storage device.
Move to the Home menu.
In Stop mode, connect the USB storage device
to the USB port on the front panel of the product.
The message “Do you want to access the
device?” appears.
Press the ◄► button to select Yes, then
press the ENTER button.
Press the RED (A) button or the BLUE (D)
button. If you pressed the RED (A) button,
go to Step 5. If you pressed the BLUE (D)
button, go to Step
4
-1
>
internet radio
You Tube
USB a Change Device
c
Safely Remove USB d
View Devices
"
Enter
Please activate Internet@TV service
to enjoy a variety of Internet Services.
CD
USB
Press the ▲▼ buttons to select USB, then
press the ENTER button.
Press the ◄► buttons to select the desired
Videos, Music or Photos, then press the
ENTER button. Go to Step 7.
4
-1
.
Press the BLUE (D) button, the screen
below appears. Go to
5
-1
.
USB
d
Home
"
Enter
Please activate Internet@TV service
to enjoy a variety of Internet Services.
USB
5
-1
.
Press the ◄► buttons to select USB, then
press the ENTER button.
6
-1
.
Press the ▲▼ buttons to select the desired
Videos, Music or Photos, then press the
ENTER button.
7.
To play back Video, Music, or Photo fi les,
see pages 48~56.
1.
2.
3.
4.
5.
6.
NOTE
You must remove the USB storage device
safely by performing the “Safe to Remove
Hardware” function to prevent possible
damage to the USB memory. Press the MENU
button to move to the main screen, press the
YELLOW (C) button, and then press the ENTER
button.
When the Audio-CD (CD-DA), MP3, or JPEG
fi les are in stop mode, you can't see the full
screen by pressing the FULL SCREEN button on
the remote control.
If you insert a disc when playing a USB storage
device, the device mode is changed to “DVD
or CD” automatically.
To listen to your music fi les with 7.1 channel sound,
you must set the Dolby Pro Logic ll mode to Matrix.
(See page 55)
Listening to Radio
Using buttons on the Remote Control
Press the FUNCTION button to select FM.
Tune in to the desired station.
Automatic Tuning 1 :
When the # $ button
is pressed, a preset broadcast station is selected.
Automatic Tuning 2 : Press and hold the
TUNING/CH (
) button to search for active
broadcasting stations automatically.
Manual Tuning : Press the TUNING/CH
(
) button to increase or decrease the
frequency incrementally.
Using the buttons on the home theater
Press the FUNCTION ( ) button to select FM.
Select a broadcast station.
Automatic Tuning 1 : Press the STOP ( ■ )
button to select PRESET and then press the
# $
button to select the preset station.
Automatic Tuning 2 : Press the STOP ( ■ )
button to select MANUAL and then press and
hold the
# $
button button to search the
band automatically
Manual Tuning : Press the
STOP ( ■ )
button to
select MANUAL
and then press the # $
button to tune in to a lower or higher frequency.
✎
1.
2.
•
•
•
1.
2.
•
•
•
HT-C6930W_XAA_0914.indd 57HT-C6930W_XAA_0914.indd 57 2010-09-14 2:52:302010-09-14 2:52:30