Filter
Top Products
|
22 English
Settings
a Previous d Skip
<
Move
"
Select
Initial Settings I Network - Wired
Choose the method to configure Internet Protocol (IP).
Please make sure that the Ethernet cable is connected.
Auto : Configure IP automatically.
Auto
Manual
6 . The product verifies the network connection
and then connects to the network. When
it is done, press the
E
button. The Initial
Settings Complete screen appears, and then
the Home screen appears.
"
Select
Initial Settings I Network - Wired
MAC Address (d0:66:7b:dc:28:fc)
IP Address, Subnet Mask, Gateway, DNS Server
Gateway Ping
Internet Service Test
Your network is operating properly.
If you still have a problem, contact your network service provider.
OK
|
NOTE
|
\
If you want to display the Initial Setting screen again and
make changes, select the Reset option. (See page 27)
\
If you use an HDMI cable to connect the product to an
Anynet+(HDMI-CEC)-compliant Samsung TV and 1.) You
have set the Anynet+(HDMI-CEC) feature to ON in both
the TV and the product and 2.) You have set the TV to a
language supported by the product, the product will select
that language as the preferred language automatically.
The Home Screen
™
No Disc a Change Device
d
View Devices
"
Enter
Settings
5
6
4
1
2
3
1
Videos. Play videos located on discs, USB
devices, or your PC.
2
Photos. View photos located on discs, USB
devices, or your PC.
3
Network Service. Select a network service:
YouTube.
4
Music. Play music located on discs, USB devices,
or your PC.
5
Settings. Set various functions to suit your
personal preferences.
6
Displays the coloured buttons on your remote that
you can press to access or perform functions.
Selecting an Option on the Home Screen
1 . To select an option on the Home screen,
move the cursor using the
◄►
buttons until it
highlights the option of your choice, and then
press the
E
button.
|
NOTE
|
\
To play or view video, music, or photo files located on
your PC, you must connect your home theater and PC
to a home network and you must download, install, and
configure the AllShare software on your PC. (See page
31.)