Samsung D5500 Stereo System User Manual


 
English 37
03 Setup
Digital Output Selection
Setup PCM
Bitstream
(Unprocessed)
Bitstream
(Re-encoded
DTS)
Bitstream
(Re-encoded
Dolby D)
Connection
HDMI supported
AV receiver
HDMI supported
AV receiver
HDMI supported
AV receiver
HDMI supported
AV receiver
Audio Stream on
Blu-ray Disc
PCM Up to 7.1ch PCM DTS re-encoded
Re-encoded
Dolby Digital *
Dolby Digital Up to 7.1ch Dolby Digital DTS re-encoded
Re-encoded
Dolby Digital *
Dolby Digital Plus Up to 7.1ch Dolby Digital Plus DTS re-encoded
Re-encoded
Dolby Digital *
Dolby TrueHD Up to 7.1ch Dolby TrueHD DTS re-encoded
Re-encoded
Dolby Digital *
DTS Up to 6.1ch DTS DTS re-encoded
Re-encoded
Dolby Digital *
DTS-HD HRA Up to 7.1ch DTS-HD HRA DTS re-encoded
Re-encoded
Dolby Digital *
DTS-HD MA Up to 7.1ch DTS-HD MA DTS re-encoded
Re-encoded
Dolby Digital *
Audio Stream
on DVD
PCM PCM 2ch PCM 2ch PCM 2ch PCM 2ch
Dolby Digital Up to 5.1ch Dolby Digital Dolby Digital Dolby Digital
DTS Up to 6.1ch DTS DTS DTS
Defi nition for
Blu-ray Disc
Any
Decodes the main
feature audio and
BONUSVIEW audio
stream together
into PCM audio and
adds Navigation
Sound Effects.
Outputs only the
main feature audio
stream so that your
AV receiver can
decode the audio
bitstream.
You will not hear
BONUSVIEW
audio or Navigation
Sound Effects.
Decodes the main
feature audio and
BONUSVIEW audio
stream together
into PCM audio and
adds Navigation
Sound Effects, then
re-encodes the
PCM audio into DTS
bitstream.
Decodes the main
feature audio and
BONUSVIEW audio
stream together into
PCM audio and adds
Navigation Sound
Effects, then re-
encodes the PCM
audio into Dolby digital
bitstream or PCM.
* If the Source Stream is 2ch, “Re-encoded Dolby D” Setting are not applied. Ouput will be LPCM 2ch.
Dynamic Range Control
You can listen at low volumes, but still hear dialog
clearly. This is only active if your product detects
a Dolby Digital signal.
Auto : The Dynamic Range Control will be set
automatically based on the information
provided by the Dolby TrueHD Soundtrack.
Off : Movie soundtracks are played using the
standard Dynamic Range.
On : When Movie soundtracks are played at
low volume or through smaller speakers, the
system can apply appropriate compression to
make low-level content more intelligible and
prevent dramatic passages from getting too
loud.
HT-D5500_XAA_0208.indd 37HT-D5500_XAA_0208.indd 37 2011-02-09 ¿ÀÀü 2:43:352011-02-09 ¿ÀÀü 2:43:35