Filter
Top Products
15
GB
14
Connecting external devices
(cont’d)
CD Player
Before moving or installing the product, be sure to turn off the power and disconnect the power cord.
Connecting audio/7.1 channel devices
By connecting through the HDMI(High-Definition Multimedia Interface) interface, you can play back digital video and audio
without conversion to analog.
Connecting external devices via HDMI
To play digital contents through the HDMI connection, both of the connected external device and TV must support High-bandwidth Digital Content
Protection System (HDCP). This product supports HDCP.
High-bandwidth Digital Content Protection System (HDCP) support
• Audio from SACD discs will not be played. To play a
DVD disk whose copyright is protected by CPPM, use a
player supporting CPPM.
• The quality of the audio output through the HDMI jack
(sampling frequency and bit rate) may be limited by the
performance of the connected device.
• Since HDMI connection supports both video and audio,
you don’t have to connect an additional audio cable.
DVD or Blu-RAY Player
TV
SAT
(Cable/Satellite/Set-top box)
CONNECTIONS
DVD/Blu-RAY or 7.1 channel player
TV
A TV with an HDMI jack.
A TV with a DVI-D jack (TV supporting HDCP)
A TV with a DVI-D jack (TV not supporting HDCP)
COMPATIBILITY WITH A TV SUPPORTING HDMI
Video/Audio
Video
-
•
Connect it if you
want to use Anynet+.
•
If you use an HDMI cable to connect a Samsung TV to the DVD Player, you can operate the AV receiver using the TV’s remote
control. This function is available only in connection with Samsung TV and DVD player supporting Anynet +(HDMI-CEC).
• Please check the logo. If your TV has an logo, then it supports the Anynet+ function.