Filter
Top Products
English 31
03 Setup
Before Starting (Initial Settings)
Turn on your TV after connecting the product.
(When the product is connected to TV for the fi rst
time, the product will turn on automatically and
display the Initial Settings screen.)
> Move
s
Select
Initial Settings I On-Screen Language
Select a language for the on-screen displays.
English
Français
Deutsch
Español
Italiano
Nederlands
Press the ▲▼ buttons to select the desired
language, then press the ENTER button.
Press the ENTER button to Start.
a Previous
"
Select
Initial Settings
TV Aspect, Musical Room Calibration and Network will be set.
Each setting may be changed later under "Settings"
Start
Press the ▲▼ buttons to select the desired TV
aspect ratio, then press the ENTER button.
(See page 34)
The
Musical Room Calibration screen appears.
Plug the ASC microphone into the ASC IN jack
on the product. (See page 38)
Press the ENTER button to Start.
d
Skip
Initial Settings I Musical Room Calibration
Preparing...
Setting the Musical Room Calibration function
takes about 3 minutes.
1.
2.
3.
4.
5.
6.
Press the ◄► buttons to select the desired
Network Settings : Wired, Wireless or
PBC(WPS), and then press the ENTER button.
If you do not know your Network Settings,
press the BLUE (D) button on your remote
instead to skip Network Settings here, fi nish the
Initial Settings, and go to the Home menu. If
you selected a Network Setting, go to pages
42~45 for more information about the Network
settings. When done, go to Step 8.
a Previous d Skip
<
Move
"
Select
Initial Settings I Network
Network Setting is needed to use various Internet services.
Choose the primary method for connecting to network.
Wired : Set the network connection using the Ethernet cable.
Please make sure that the Ethernet cable is connected.
Wired
Wireless PBC(WPS)
Press the OK button.
The home menu appears. (For more information
about home menu, please see page 32)
Home Menu
internet radio
You Tube
No Disc a Change Device
d
View Devices
"
Enter
Please activate Internet@TV service
to enjoy a variety of Internet Services.
NOTE
When the product is connected to TV for the
fi rst time, the product will turn on automatically.
This is not a malfunction.
The home menu will not appear if you do not
confi gure the initial settings, with the exception
below.
If you press the BLUE (D) button during the
Musical Room Calibration or Network setup,
you can access the home menu even if the
network setup is not completed yet.
When you return to the home menu, the full
screen mode is cancelled automatically.
7.
8.
•
✎
Setup
HT-C6930W_XAA_0914.indd 31HT-C6930W_XAA_0914.indd 31 2010-09-14 2:51:432010-09-14 2:51:43