Samsung AH68-02279R Home Theater System User Manual


 
English 29
02 Connections
Connecting to the Network
Wireless Network
You can connect to your network with a Wireless IP sharer. A wireless AP/IP router is required to make
a wireless network connection. To set the network confi guration options. see page 41.
NOTE
To use a wireless network, your product must be connected to a wireless IP sharer. If the wireless IP sharer
supports DHCP, your product can use a DHCP (dynamic) or static IP address to connect to the wireless network.
This product supports IEEE 802.11B, G, and N. We recommend using IEEE 802.11N. When you play video
over a IEEE 802.11B or G connection, the video may not play smoothly.
Select a channel for the wireless IP sharer that is not currently being used. If the channel set for the wireless IP
sharer is currently being used by another device nearby, this will result in interference and communication failure.
If you select the Pure High-throughput (Greenfi eld) 802.11n mode and set your AP's Security Encryption type
to WEP, TKIP or TKIPAES (WPS2Mixed), your Samsung home theater will not support the connection in
compliance with new Wi-Fi certifi cation specifi cations.
If your AP supports WPS (Wi-Fi Protected Setup), you can connect to the network via PBC (Push Button
Confi guration) or PIN (Personal Identifi cation Number). WPS will automatically confi gure the SSID and WPA
key in either mode.
Connection Methods : You can setup the wireless network connection 3 ways:
- PBC(WPS)
- Auto Setup (Using the Auto Network Search function)
- Manual Setup
Wireless LAN, by its nature, may cause interference, depending on the operating conditions.
(AP performance, distance, obstacles, interference by other radio devices, etc).
Set the wireless IP sharer to Infrastructure mode. Ad-hoc mode is not supported.
When applying the security key for the AP (wireless IP sharer), only the following security protocols are
supported:
Authentication Mode : WEP, WPAPSK, WPA2PSK
Encryption Type : WEP, AES
To use the AllShare function, you must connect your PC to your network as shown in the fi gure.
The connection can be wired or wireless.
1)
2)
Wireless IP sharer
Networking with PC for
AllShare function
(See pages 63~64)
PC
Broadband
service
HT-C6900W_XAA_0914.indd 29HT-C6900W_XAA_0914.indd 29 2010-09-14  2:27:542010-09-14  2:27:54