Filter
Top Products
ENG
21
POWER
FUNCTION
TIMER
ON/OFF
REPEAT REPEAT
A-B
MUTE
RDS PTY +10
MP3-CD/CD/TAPE
GIGA
VOL VOL
DSP/EQ
TUNING /ALBUM
TUNING /ALBUM
MO/ST TUNING
MODE
RDS DISPLAY
RIPPING
TIMER/CLOCK SLEEP
DISPLAY DISC SKIP
RIPPING
SPEED
PARTY
TAPE REC
After having set the timer, it will start automatically as shown by the
TIMER indication on the display. If you no longer wish to use the timer,
you can cancel it.
To... Press the TIMER ON/OFF button....
Cancel the timer .................... Result:
is no longer displayed.
Restart the timer .................... Result:
is displayed again.
POWER
FUNCTION
TIMER
ON/OFF
REPEAT REPEAT
A-B
MUTE
RDS PTY +10
MP3-CD/CD/TAPE
GIGA
VOL VOL
DSP/EQ
TUNING /ALBUM
TUNING /ALBUM
MO/ST TUNING
MODE
RDS DISPLAY
RIPPING
TIMER/CLOCK SLEEP
DISPLAY DISC SKIP
RIPPING
SPEED
PARTY
TAPE REC
Cancelling the Timer
POWER
FUNCTION
TIMER
ON/OFF
REPEAT REPEAT
A-B
MUTE
RDS PTY +10
MP3-CD/CD/TAPE
GIGA
VOL VOL
DSP/EQ
TUNING /ALBUM
TUNING /ALBUM
MO/ST TUNING
MODE
RDS DISPLAY
RIPPING
TIMER/CLOCK SLEEP
DISPLAY DISC SKIP
RIPPING
SPEED
PARTY
TAPE REC
If the timer switch on and off times are identical,
◆
ERROR is
displayed.
You may use the
◆
[, ] buttons or the Tuning/Jog Control on the
main unit instead of the TUNING/ALBUM
or button to
follow steps 5 to 9 above.
The timer enables you to switch the system on or off at specific times
automatically.
Example: You wish to wake up to music every morning.
Before setting the timer, check that the current time is correct.
◆
For each step, you have a few seconds to set the required options.
◆
If you exceed this time, you must start again.
If you no longer want the system to be switched on or off
➣
automatically, you must cancel the timer by pressing the TIMER ON/OFF
button.
Switch the system on by pressing the
1
STANDBY/ON ( ) button.
Press the
2
TIMER/CLOCK button until PLAY TIMER is displayed.
Press
3
the ENTER ( ) button.
Result: ON TIME is displayed for a few seconds, followed by any
switch-on time already set; you can set the timer switch-on
time.
Press the
4
ENTER ( ) button.
Set the timer switch-on time.
5
a Press the TUNING/ALBUM or button.
b Press the ENTER ( ) button.
Result: The minutes flash.
c Press the TUNING/ALBUM
or button.
b Press the ENTER ( ) button.
Result: OFF TIME is displayed for a few seconds, followed by any
switch-off time already set; you can now set the timer
switch-off time.
Set the timer switch-off time.
6
a Press the TUNING/ALBUM or button.
b Press the ENTER ( ) button.
Result: The minutes flash.
c Press the TUNING/ALBUM
or button.
d Press the ENTER ( ) button.
Result: VOL XX is displayed, where XX corresponds to the
volume already set.
Press the
7
TUNING/ALBUM or button to adjust the volume
level and press the ENTER (
) button.
Result: The source to be selected is displayed.
Press the
8
TUNING/ALBUM or button to select the desired
source to be played when the system switches on.
If you select... You must also...
FM(radio) ............................ a Press the ENTER (
) button.
b Select a preset station by pressing the
TUNING/ALBUM
or button.
CD/MP3 (compact disc) ..... Load one or more compact discs.
TAPE .................................. Insert a Cassette Tape.
USB1/USB2 ........................ Connect the USB device.
Press
9
the ENTER ( ) button to confirm the timer.
Press
10
the STANDBY/ON ( ) button to set the system to standby mode.
Standby mode: The power is turned off while the main unit is plugged in
AC power supply.
The system will switch on and off automatically at the required times.
Timer Function
MX-C870-C850-C830-XAC-ENG.indd 21 2010-6-22 15:33:32