Filter
Top Products
20 English
Connections
Stand Pole
1
Stand Bracket
Connect the Stand Pole to the Stand Bracket.
1.
2
Insert and tighten three large screws (5x15, For connecting
Stand Pole & Stand Bracket) into the three holes on the Stand
Bracket as shown in the illustration.
2.
3
Straighten the speaker wire and route it through the Stand Pole.
3.
Connect the Stand Pole to the Stand Neck and
Stand Base.
- Make sure all holes are properly connected,
if not, the stand will fall down.
4.
Installing the Speakers on the Tallboy Stand
Connecting the Speakers
Stand Pole
4
Stand Base
Stand Neck
HT-C7530W_XAA_0817.indd 20HT-C7530W_XAA_0817.indd 20 2010-08-17 8:49:362010-08-17 8:49:36