Filter
Top Products
English 35
05 Advanced Functions
USB Function
Playing Media Files using the
USB Host Feature
You can enjoy media fi les such as pictures, movies
and music saved on an MP3 player, USB memory
stick or digital camera in high quality video with 5.1
channel sound by connecting the storage device to
the USB port of the product.
Connect the USB device to the USB port on the
front panel of the product.
Press the FUNCTION button to select USB.
USB appears on the display screen and then
disappears.
Press the
◄►
buttons to select Videos, Music
or Photo.
- Select a fi le to play.
Safe USB Removal
To prevent damage to the memory stored in the
USB device, perform safe removal before
disconnecting the USB cable.
Press the YELLOW(C) button.
- REMOVE will appear on the display.
Remove the USB cable.
NOTE
To listen to your music fi les with 5.1 channel
sound, you must set the Dolby Pro Logic II
mode to Matrix. (See page 33)
Remove the USB cable from the USB port
slowly. Otherwise, it may cause damage to the
USB port.
1.
2.
•
3.
•
•
✎
Advanced Functions
CD Ripping
B
Converts audio sound of the CD into a MP3 fi le
format before sending to a USB storage device.
Connect the USB device to your product.
Insert the audio CD into the CD tray.
Press the CD RIPPING button.
To start ripping the current track,
press the CD RIPPING button on
the remote control while the system
is playing a track or stopped temporarily.
To rip the entire CD, press and hold the CD
RIPPING button on the remote control.
-"FULL CD RIPPING" appears on the display
and ripping starts.
Press the STOP () button to stop ripping.
When the CD ripping is done, a directory
named "RIPPING" will be created in the USB
device and the ripped fi le will be saved in a
format of "SAM-XXXX”.MP3".
NOTE
Do not disconnect the USB connection or the power cable
during the CD ripping. Otherwise, it may cause damage to the
data. To stop CD ripping, press the STOP button and
disconnect the USB device after the system stops playing the
CD completely.
If you disconnect the USB connection during the CD ripping,
the system will turn off and you will not be able to delete the
ripped fi le.
If you connect the USB device to the system while it is playing
a CD, the system stops temporarily and will play again.
DTS-CDs cannot be ripped.
If the ripping duration is less than 5 seconds, a ripping fi le may
not be created.
CD ripping works only if the USB device or the HDD is
formatted in the FAT fi le system. (The NTFS fi le system is not
supported.)
For a list of compliant devices, refer to the specifi cation of the
USB host.
The ripping is performed at a normal speed of x3. The ripping
time may be longer with some USB devices.
While the system is ripping a CD, the audio sound will not be
output.
Do not put touch or move the system while it is ripping a CD.
1.
2.
3.
•
•
4.
•
✎
D
CD RIPPING
HT-C463-XAC_ENG-0304.indd 35HT-C463-XAC_ENG-0304.indd 35 2010-03-04 9:21:052010-03-04 9:21:05