Filter
Top Products
61
ENG
● SYSTEM SETUP
DOLBY PRO LOGIC II EFFECT
This function works only in Dolby Pro Logic MUSIC mode.
Press the PL II MODE button to select MUSIC mode.
Press the PL II EFFECT button.
Each time the button is pressed, the mode changes as
follows.
Press the
,
buttons to select the desired effect setting.
PANORAMA : You can select either 0 or 1.
C- WIDTH : You can select between 0 and 7.
DIMENS : You can select between 0 and 6.
P.BASS
P.BASS function boosts the bass for a more powerful
sound.
Press the P.BASS button to select P.BASS mode.
Press the P.Bass button again to turn off the P.Bass mode.
The P.BASS function is only available with 2 channel LPCM sources such as mp3,Divx,cd
and wma. Press P.BASS button and "POWER BASS ON" will be displayed on the screen.
The P.bass does not work with DSP/EQ or DOLBY PRO LOGIC ll modes.
If you press P.BASS in the DSP/EQ mode, the DSP/EQ mode is automatically shut off and
the P. BASS function comes on.
1.
2.
~
3.
~
~
~
1.
2.
M
`
`
HT-Z310(TZ312)_XAC(ENG)_0220.ind61 61 2008-02-20 �� 3:57:22