Filter
Top Products
21
ENG
● CONNECTIONS
Speaker Components
How to Install the Speaker on the Stand Base
Connect the SPEAKER with the
STAND BASE.
Insert the SCREW into the hole on the rear
of the speaker using a screwdriver as shown
in the illustration.
This is the SPEAKER successfully
assembled with the Stand Base.
1.
2.
3.
1 2
3
SPEAKER
STAND
BASE
HT-TZ312
Turn the STAND upside-down and connect
it to the STAND BASE.
Insert three small SCREWS into three holes
marked with arrows using a screwdriver as
shown in the illustration.
Insert a large SCREW into the hole on the
rear of the Speaker STAND.
Connect the assembled stand to the
SPEAKER.
Insert another large SCREW into the hole
on the rear of the speaker using a
screwdriver as shown in the illustration.
This is the successfully assembled speaker.
Make sure that the speaker is installed on a
fl at and stable area. Otherwise it may be
easily knocked over.
1.
2.
3.
4.
5.
6.
1 2
5 6
How to Install the Speaker on the Stand
STAND
BASE
3 4
STAND
SPEAKER
STAND
SUBWOOFER STAND BASESTAND
FRONT
SCREW (Large): 4EA
SCREW (Small): 6EA
REAR
CENTER
CRADLE STAND/
WALL MOUNT
REAR
CENTER
REAR
CENTER
HOLE COVER
(L) (R)
(L) (R)
HT-Z310(TZ312)_XAC(ENG)_0220.ind21 21 2008-02-20 �� 3:56:41