Filter
Top Products
16
Quick Start - Stage XPD1 Wireless System
Plug the RXD1 USB receiver into the
USB jack labeled 2.4GHz WIRELESS.
On the wireless handheld transmitter,
unscrew the bottom section of
the microphone by turning it
counterclockwise and then slide it off.
Place a fresh set of AA (LR6) batteries
in the transmitter battery holder,
taking care to observe the polarity
markings, then replace the cover.
Turn the WIRELESS LEVEL
knob on the XP106 completely
counterclockwise to 0, then turn the
POWER siwtch on the XP106 to the
ON position.
Turn on the power to the transmitter
by pressing and holding Power switch;
the indicator LED will light amber.