13
XP106 • Portable PA System
The XP106 has an internal, rechargeable battery capable of up to 20 hours
of continuous audio on a full charge. Even though the system may have some
charge when first taken out of the box, we recommend fully charging your
XP106 before first using the system.
To charge the battery:
• Set the power switch to the
“OFF” position.
• Connect the XP106 to an
AC power outlet using the
included power adapter.
• Keep the system plugged in
until the Battery indicator
changes to green, indicating
the battery is fully charged.
The XP106 utilizes a sealed lead-acid gel cell battery. When not in use, the
battery will slowly self-discharge. If you are planning not to use the XP106
for a long period of time, it is advised to fully charge the unit before storing.
It is also important to charge the unit every six months when not used. This
will ensure a healthy battery and extend its life. If the battery is left with a
very low charge for an extended period of time, it is possible to recharge the
battery to working condition, but the charge time can take over 24 hours.
If you find that the operation time of the XP106 becomes noticeably
decreased, even after fully charging, the battery should be replaced. Contact
Samson customer service or your local distributor for a replacement battery.
Charging the Battery
ENGLISH
FRANÇAISDEUTSCHEESPAÑOLITALIANO