Samson UHF Series One Stereo Receiver User Manual


 
8
Guided Tour - UT1L / UT1G
8: Power on-off switch* - Use this to turn the UT1L / UT1G on or off (to conserve battery
power, be sure to leave it off when not in use).
9: Audio Input Level control (trimpot) - This input sensitivity control has been factory
preset to provide optimum level for the particular lavalier or headset model being used
(in the case of the UT1G, it is preset for optimum instrument level) and so we recommend
that this not be adjusted manually. If necessary, however, you can use the supplied plastic
screwdriver (see #10 below) to raise or lower the UT1L / UT1G input level. See the
Setting Up and Using the UM1 System section on page 8 in this manual for more informa-
tion.
10: Plastic screwdriver - Specially designed for use in adjusting the UT1L / UT1G Audio
Input Level control (see #8 above) and/or UM1 Squelch control (see #7 on page 3). See
the Setting Up and Using the UM1 System section on page 8 in this manual for more
information.
* Be sure to mute the audio signal at your external mixer or amplifier before turning
transmitter power on or off, or an audible pop may result.
SAMSON
8
9
7
10
ENGLISH