Samson Concert 288 Headphones User Manual


 
11
Concert 288 Dual Channel Wireless System
ENGLISH
FRANÇAISDEUTSCHEESPAÑOLITALIANO
1. Input Connector - Connect the input device via the mini-XLR connector. The
CB288 is supplied with either a lavalier, headset microphone or ¼" instrument
cable.
2. Status Indicator - This LED displays the operation mode:
GREEN Normal Operation
RED Mute
Flashing GREEN Low Battery
3. Power/Mute Switch - Press and hold to turn the unit on or off. Press and release
to mute or unmute the transmitter.
4. Belt Clip - Use this clip to fasten the CB288 transmitter to a belt or guitar strap.
5. Battery Cover Release - Push in both sides and pull back to open the CB288
battery cover.
6. Antenna - This permanently attached transmitter antenna should be fully
extended during normal operation.
12 3
4
5 5
6
CB288 Belt Pack Transmitter