Samson 170 Stereo Amplifier User Manual


 
16
Specifications
1. Rated Output Power @ 5% @ 1%
At 1 kHz, 4 ohm Model 550 340 W 300 W
Model 260 150 W 139 W
Model 170 105 W 94 W
At 1 kHz, 8 ohm Model 550 230 W 215 W
Model 260 95 W 105 W
Model 170 70 W 60 W
2. Total Harmonic Distortion (with 30 kHz LPF, 4 ohm)
Model 550 @ 275 watts 0.07%
Model 260 @ 130 watts 0.20%
Model 170 @ 85 watts 0.10%
3. Signal To Noise Ratio (with 80 kHz LPF, all models)
Channel R 103 dB
Channel L 103 dB
4. Frequency Response (LPF off, all models) 20 Hz - 50 kHz, 0 - 1.5 dB
5. Input Sensitivity (all models) 0 dBu ± 1 dB
to achieve rated power
(Attenuator set to maximum)
6. Crosstalk (at 7 kHz sine wave, all models) 85 dB typical
7. Residual Noise (VR min, all models) 73 dB typical
8. DC Offset Voltage (all models) 0 ± 50 mV
9. Idle LED Indicator Output Sensitivity (all models) More than 2.2 V
10. Damping Factor Greater than 100
11. Dimensions
Servo-550 19 in (w) x 9.75 (d) x 5.25 (h)
482 mm (w) x 247 (d) x 133 (h)
Servo-260 19 in (w) x 9.50 (d) x 3.50 (h)
482 mm (w) x 241 (d) x 89 (h)
Servo-170 19 in (w) x 9.50 (d) x 3.50 (h)
482 mm (w) x 241 (d) x 89 (h)
12. Weight
Servo-550 28.0 lbs 12.7 kg
Servo-260 17.0 lbs 7.7 kg
Servo-170 14.5 lbs 6.6 kg
NOTE: All specs are taken at less than 1% THD