3
INTRODUCTION
The Russound R275HC is a 2-channel high-current power
amplifier capable of driving low impedance loads and
incorporates selectable volume control protection circuitry.
This amplifier can be used for power upgrades in specif-
ic zones, for large speaker selector or volume control
systems and for long series-parallel speaker runs
(e.g., large outdoor zones).
The R275HC is rated at 75 watts per channel into 8
ohms and 100 watts into 4 ohms. With the
Stereo/Bridge Mono switch in the Bridge Mono position,
both amplifier channels are combined for a higher pow-
ered mono output. In Bridge mode the R275HC is rated
at 200 watts of power into a single 8-ohm load. All this
power is backed by a high output toroidal transformer.
Each amplifier output channel incorporates robust pro-
tection circuitry for safety and reliability under extreme
circumstances.
FRONT PANEL
RACK MOUNTING
The R275HC amplifier can be rack mounted using the included rack-mount ears and hardware to attach the ears to
the amplifier. The amplifier will take 2 rack spaces with the feet removed.
+
+
R275HC Side View
Rack Ear
Front View
Rack Ear
Side View
Rack Ear
Screw Holes
R275HC AMPLIFIER
Tri-color Indicator LED: The LED will illuminate red when the power is on and the amplifier is in standby,
green when the amplifier is active and orange when in short circuit protection.
1
1