Speaker Outputs: The A and B speaker outputs are in parallel to the
amplifier output. When connected to the A or B output, either 6-
ohm or 8-Ohm speakers could be used. When using both A and B
speaker outputs, only speakers with impedance higher than 8
Ohms can be connected. For Bridge amplifier operation, connect
the + of the speaker to the R+ and - of the speaker to the L+ of the
amplifier.
Mono Bridged Operation
Stereo Operation
7
SPEAKER A OUT
SPEAKER B OUT
LEFT SPEAKER
8 OHM
INPUT FROM
LEFT LINE
LEVEL OUTPUT
STEREO
BRGD *
MONO
LINE INPUT
SENSING
L
R
SPEAKER A OUT
SPEAKER B OUT
RIGHT SPEAKER
8 OHM
INPUT FROM
RIGHT LINE
LEVEL OUTPUT
STEREO
BRGD *
MONO
LINE INPUT
SENSING
L
R
FIRST DPA-1.2 AMPLIFIER SECOND DPA-1.2 AMPLIFIER
SPEAKER A OUT
SPEAKER B OUT
8 OHM SPEAKERS
8 OHM SPEAKERS
STEREO
BRGD *
MONO
SPEAKER A OUT
SPEAKER B OUT
6 OHM SPEAKERS
STEREO
BRGD *
MONO