Russound DPA-1.2 Stereo Amplifier User Manual


 
2. INTRODUCTION
Congratulations on your recent purchase of the Russound DPA-1.2
two-channel amplifier. The DPA-1.2 is a high-current, high-quality
amplifier, which includes automatic A/B switching. The DPA-1.2
two-channel amplifier will amplify a source at the sensing line
input or the sensing speaker level input. Switching between a
default audio source and a local source, the DPA-1.2 is ideally suit-
ed for those applications that require automatic switching and
amplification. The DPA-1.2 power output per channel is 35 watts
per channel into 8-Ohms, and 45 watts into 6-Ohms. Bridged out-
put provides 70 watts of power into 8-Ohms. Each amplifier output
channel incorporates thermal, and short circuit protection and
Russounds unique Dynamic Clipping Sensor that allows for better
headroom and volume without clipping or distortion.
The Russound DPA-1.2 amplifier is built with pride. Fidelity,
Reliability and Quality are the primary objective. Russound prod-
ucts are guaranteed to provide years of enjoyment.
3. POSSIBLE SYSTEM CONFIGURATIONS
The DPA-1.2 can be used as a single-source two-channel zone
amplifier, or as a local-source amplifier that automatically switches
between a default source (such as a whole-house audio distribution
system) and a local source (such as a television set).
4