Filter
Top Products
19
INSTALLER
MAKING CONNECTIONS
RNET Source Audio and IR Input Connections
Russound #09-0508 IR Link Cable
for IR Control of equipment
IR Link Cable
Pos (+)
Neg (–)
IN OUT
LINK
AUDIO OUTPUTS
1394
IR I
N
POWER
+12VDC
6A MAX
MOUSE
KEYBOARD
CRT VGA
S-V
IDEO
COMPOSITE
VIDEO
RS232
I
NTERFACE
USB 2.0/1.1
LAN
SMS3
Smart Media Server
US
C
ASSEMBLED IN THE USA
NEWMARKET, NH
RS-232
INTERFACE
IR
LR
A
UDIO OUTPUT
12VDC 1.25A
I
N OUT
NEWMARKET, NH U.S.A.
ST2
Smart Tuner
LINK KEYPAD PORTS
TUNER 1TUNER 2
FM C
OAX
LOOP
ANTENNA
FM COAX
LOOP
ANTENNA
Serial#
MADE IN KOREA
IR
LR
A
UDIO OUTPUT
IR Link Cable
IR Link Cable
ST2 Tuner
SMS3 Media Server
CAS44 Controller
RCA Cables
RCA Cables
RNET Source Audio Connections
The CAS44 supports audio connections to
Russound RNET components such as the ST2
Tuner and the SMS3 Media Server.
Using quality RCA signal cables, connect the Left
and Right Audio outputs from each RNET source
to the corresponding inputs on the CAS44 con-
troller. Label each cable with the name of the
selected source and the Source Audio input num-
ber located on the CAS44.
Common IR Connections
The CAS44 uses two Common IR jacks to allow
control of the source equipment with IR signals
received through the keypad. The connection for
the Common IR Out jack is made using an IR link
cable with a 1/8’’ plug.
An IR Link Cable (Russound P/N 09-0508) is
used to connect the IR In of the source to the
Common IR Out jack on the CAS44. The ST2S
Tuner can be controlled by infrared commands
received through either of the two IR connec-
tions on the rear panel. These components can
be controlled through the keypads with the CAS-
RC remote control, or with the source remotes
(ST2-RC, SMS3-RC). When used with the KPL key-
pad, there will be no RNET source information
sent to the keypad display.