Filter
Top Products
Installation
Runco LS-3/LS-5 Installation/Operation Manual 21
PRE
L
IMINAR
Y
Folded OpticsIn rear-screen applications where space behind the projector is limited, a mirror may be
used to fold the optical path, as shown in
Figure 3-6. The position of the projector and
mirror must be accurately set. If you are considering this type of installation, contact your
dealer for assistance.
Figure 3-6. Folded Optics
Other ConsiderationsOther considerations and tips that can help improve your installation:
• Keep the ambient temperature constant and below 35°C (95°F). Keep the projector
away from heating and/or air conditioning vents. Changes in temperature may cause
drifts in the projector circuitry, which may affect performance.
Keep the projector away from devices that radiate electromagnetic energy such as motors
and transformers. Common sources of these include slide projectors, speakers, power
amplifiers and elevators.
3.4
Installing the Optional
CineWide Lens Mount
If you are installing a standard (non-CineWide) LS-3/LS-5, skip this step and proceed with
Mounting the LS-3/LS-5 (page 23).
If you are installing an LS-3/LS-5/CineWide, proceed with Installing the
Fixed CineWide Base Plate (page 22).
Screen
Mirror
1. Do not install the CineWide lens yet, only the fixed CineWide
base plate. You will install the CineWide lens after you install the
projector and adjust the primary lens.
2. Some components shipped with your projector may differ slightly
from what is shown in these instructions.
Note