Filter
Top Products
14
RT-06 DAB/AM/FM Stereo Tuner
RT-06 DAB/AM/FM Stereo Tuner
The following options are available: Use of
these features will require knowledge of your
local DAB transmitter.
DAB DAC VOLUME – The RT-06 allows
level adjustments to the DAC volume. The DAC
volume can be adjusted between 0 – 255 using
the up and down keys. This feature can be
used to match the output signal level of other
equipment in your set-up.
DIMMER – Select to change the FL display
brightness using the up and down keys. This
can be adjusted to your preference.
FACTORY DEFAULT – Select when you
wish to return the RT-06 to its factory settings.
Confirm factory default by pressing the ENTER
button. WARNING: Selecting factory default
will erase all saved settings.
TUNER AREA – Your tuner should be set to
operate within the country of purchase. The
tuner area can be set to either <EUROPE> or
<N_AMERICA>.
VERSION – This feature will confirm the main
software version of the RT-06.
Front CPU Upgrade – select this option
to upgrade the front CPU. Note: this menu
selection is used only with the factory so there
is no need for you to use this feature.
EXIT – Select to exit the set-up menu.
Searching for a DAB station
NOTE: When using the DAB tuner for the
first time the FL display will ask whether you
want to auto-tune to find the available ser-
vice in your area. For most applications
auto-tune should only need to be carried out
once. Select YES to confirm the selection.
The tuner will then search automatically for
available stations on the DAB network. The
number of stations received will depend on
the location of your aerial and the available
multiplexes in your location. For optimal re-
ception we recommend using a dedicated
outdoor antenna.
AUTO TUNE button
=R
You may also wish to repeat the search periodi-
cally to discover if any new multiplexes (i.e.
group of services) have gone on air, or if you
move the tuner to a different area.
NOTE: Auto tune will erase any preset sta-
tions saved to memory.
1. Select the DAB tuner by keying BAND
on the front panel or DAB of the remote
control.
2. Press AUTO TUNE to search for first en-
semble stations. The FL display will change
to [ DAB Auto Tuning ] and <No>, <Yes>
to perform.
3. Choose <No> by keying the UP/DOWN
buttons on the front panel, press ENTER if
you do not wish to retune. Choose <Yes>
by keying the UP/DOWN buttons of the
front panel, press ENTER to search new
ensembles and replace current stations
automatically.
How to store DAB stations
When auto tune is finished the service iden-
tification will be displayed. Use the up/down
buttons to select the desired station.
To memorize the station press MEMORY
followed by your numbered preference.
Example: “Memory” + “1” + “2”
Repeat this process for saving additional
stations.
How to call a PRESET
After a station has been saved to memory it
can be recalled using the number keys.
Example: “1” + “2”