Filter
Top Products
2
RA-04 Stereo Integrated Amplifier
Important Safety Instructions
WARNING: There are no user serviceable parts inside.
Refer all servicing to qualified service personnel.
WARNING: To reduce the risk of fire or electric shock, be
sure that the apparatus shall not be exposed to dripping
or splashing and that no objects filled with liquids, such
as vases, shall be placed on the apparatus.
Do not allow foreign objects to get into the enclosure. If
the unit is exposed to moisture, or a foreign object gets
into the enclosure, immediately disconnect the power
cord from the wall. Take the unit to a qualified service
person for inspection and necessary repairs.
Read all the instructions before connecting or operating the component.
Keep this manual so you can refer to these safety instructions.
Heed all warnings and safety information in these instructions and on
the product itself. Follow all operating instructions.
Clean the enclosure only with a dry cloth or a vacuum cleaner.
You must allow 10 cm or 4 inches of unobstructed clear-
ance around the unit. Do not place the unit on a bed, sofa, rug,
or similar surface that could block the ventilation slots. If the component
is placed in a bookcase or cabinet, there must be ventilation of the
cabinet to allow proper cooling.
Keep the component away from radiators, heat registers, stoves, or
any other appliance that produces heat.
The unit must be connected to a power supply only of the type and
voltage specified on the rear panel of the unit.
Connect the component to the power outlet only with the supplied power
supply cable or an exact equivalent. Do not modify the supplied cable
in any way. Do not attempt to defeat grounding and/or polarization
provisions. Do not use extension cords.
Do not route the power cord where it will be crushed, pinched, bent
at severe angles, exposed to heat, or damaged in any way. Pay par-
ticular attention to the power cord at the plug and where it exits the
back of the unit.
Main plug is used as the mains disconnect device and shall remain
ready accessible.
The power cord should be unplugged from the wall outlet if the unit is
to be left unused for a long period of time.
Immediately stop using the component and have it inspected and/or
serviced by a qualified service agency if:
• The power supply cord or plug has been damaged.
• Objects have fallen or liquid has been spilled into the unit.
• The unit has been exposed to rain.
• The unit shows signs of improper operation
• The unit has been dropped or damaged in any way
Please use Class 2 Wiring when connecting the speaker terminals of
the unit to ensure proper insulation and minimize the risk of electrical
shock.
Place the unit on a fixed, level surface strong enough to support its
weight. Do not place it on a moveable cart that could tip over.
This symbol means that this unit is double
insulated. An earth connection is not
required.
Rotel products are designed to comply with international
directives on the Restriction of Hazardous Substances (RoHS)
in electrical and electronic equipment and the disposal of
Waste Electrical and Electronic Equipment (WEEE). The
crossed wheelie bin symbol indicates compliance and that
the products must be appropriately recycled or processed
in accordance with these directives.