Filter
Top Products
4
Figure 2
Connecting the Hera Power Supply to the power outlet:
Connect the IEC end of the detachable power cord to the Power Supply, shown in
Figure 3. Plug the opposite end of the power cord into an appropriate power
outlet. It is recommended that both the Hera and your power amplifier are
plugged into the same wall outlet if possible (perhaps using a power outlet strip)
in order to avoid creating a ground loop.
Figure 3
Connecting the Hera to two channel (Stereo) sources:
Connections are made on the rear panel of the preamplifier and are shown in
Figure 3. The input connections for two channel source material are made via
RCA Jacks or XLR Balanced Connectors. There are 4 RCA line level inputs:
Balanced
Outputs
Balanced
Input
RCA
Outputs
Unity
Gain
Tape
Loop
Processor
Loop
RCA
Inputs
IEC
Power Plug
Main
Fuse
Power
Supply
Cables