Filter
Top Products
– 1 –
P
UNCH
A
MPLIFIER
A
CCESSORY
P
ACK
The accessory pack shipped with the “250 series” Power amplifiers include the mounting hardware necessary to secure
the ampliifer to the vehicle and to attach the end caps to the amplifier.
Punch Power 250.2 Punch Power 250.1
Installation & Operation Manual Installation & Operation Manual
Punch Verification Certificate Punch Verification Certificate
(4) Amplifier mounting screws (#8 x
3
⁄4" phillips) (4) Amplifier mounting screws (#8 x
3
⁄4" phillips)
(8) Speaker & power connector screws (3/32" allen) (6) Speaker & power connector screws (3/32" allen)
(4) End cap mounting screws (9/64" allen) (4) End cap mounting screws (9/64" allen)
(1) Allen wrench 3/32" (1) Allen wrench 3/32"
(1) Allen wrench 9/64" (1) Allen wrench 9/64"
The “250 Series” Power amplifiers represent the best Rockford Fosgate has to offer! Our engineers devised technical features
which would be considered overkill by other audio manufacturers, but not at Rockford Fosgate! Trans•nova, DIAMOND and
TOPAZ, exclusively designed by Rockford, are just a few of these features which are described in the Technical Design
Features section of this manual.
The 250.2 is a two-channel amplifier which is optimized to drive 2Ω stereo and 4Ω bridged loads. The 250.1 is a single
channel amplifier optimized to drive a 2Ω (single amp) or a 4Ω bridged load (pair of amps bridged to a single load).
The “250 series” use Rockford's innovative technologies for awesome sound quality, reliable performance and high output
power into low impedances. This can be beneficial for serious competition vehicles.
I
NTRODUCTION
TO
250 S
ERIES