Filter
Top Products
15
Presetting stations
There are 20 memory presets on each of the DAB and FM wavebands.
1. Switch on the unit by rotating the Function switch to the Radio
position.
2. Switch to the desired waveband and tune to the required station as
previously described.
3. Press the Memory Up or Down buttons to select the desired preset
number under which you wish to store the station.
4. Press and hold down the Stop / Memory button until the display
shows e.g. 'P2 saved'. The station will be stored under the chosen
preset. Repeat this procedure for the remaining presets.
5. Stations stored in preset memories may be overwritten by following
the above procedure.
FM stereo / mono
1. If an FM station is received with a weak signal some hiss may be
audible. To reduce the hiss press and hold the Select button the
display will show 'Mono'. Your radio will switch to mono mode.
2. To return to stereo mode press and hold the Select button the
display will show 'Auto'. The radio will switch to stereo mode.
1,2
1
4
3
3