Roberts Radio RD-55 Radio User Manual


 
Operating your radio - DAB
1. Carefully extend the telescopic aerial.
2. Press the On/Off button to switch on your radio. The display will show
"Roberts" for a few seconds.
3. If this is the fi rst time the radio is used a quick scan of UK Band III DAB
channels will be carried out. The display will show "Now tuning". If the
radio has been used before the last used station will be selected.
4. During Autotune, the display will show "Scanning" and as each group
of stations is detected the station count will be updated. The top line of
the display shows a bargraph indicating progress of the Autotune.
5. When the Autotune is completed the fi rst station (in numeric-alpha
order 0...9...A....Z) will be selected.
6. If the station list is still empty after the Autotune your radio will display
"No signal".
7. If no signals are found it may be necessary to relocate your radio to
a position giving better reception.
2
9