Roberts Radio RD-45 Radio User Manual


  Open as PDF
of 24
 
If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
6
Operating your radio - DAB
1. Carefully extend the telescopic aerial.
2. Press the
On/Off button to switch on your radio. The mains indica-
tor will light and the display will show "Roberts digital radio" for a few
seconds.
3. IfthisisthersttimetheradioisusedaquickscanofUKBandIIIDAB
channels will be carried out. The display will show "Now tuning". If the
radio has been used before the last used station will be selected.
4. During Autotune, the display will show "Scanning" and as each group
of stations is detected the station count will be updated. The bottom
line of the display shows a bargraph indicating progress of the Auto-
tune.
5. WhentheAutotuneiscompletedtherststation(innumeric-alpha
order0...9...A....Z)willbeselected.Therststationinthelistofsta
-
tions found will be played . The display will show the station name in
therstlineofthedisplayandotherinformationinthesecondline.
6. If the station list is still empty after the Autotune your radio will display
"No Signal".
7. If no stations are found, "Station not available" will be displayed and
it may be necessary to relocate your radio to a position giving better
reception.Youshouldthencarryoutanautoscantondstationsas
described on page 9.
2
 previous next