Roberts Radio RD-45 Radio User Manual


  Open as PDF
of 24
 
9
1
Finding new stations - DAB
Astimepassesnewstationsmaybecomeavailable.Tondnewstations
proceed as follows:-
1. Press and release the
Auto Tune button, your radio will perform a
scanoftheUKDABfrequencies.Asnewstationsarefoundthestation
counter on the right-hand side of the display will increase and stations
will be added to the list.
2. TocarryoutafullscanoftheentireDABBandIIIfrequenciespress
and hold down the Auto Tune button for more than 2 seconds and
then release. The station counter on the right-hand side of the display
will increase and stations will be added to the list.
Signal strength display - DAB
1. Press and release the Info button until the display shows signal
strength.
2. Position your radio and carefully angle the telescopic aerial for best
reception using the signal strength display as a guide. Move your
radio around and position so as to give maximum number of black
rectanglesonsignal strengthdisplay.Theclearunlledrectangle
indicatesminimumsignallevelrequiredforsatisfactoryreception.
3. Press the
Info button to exit the signal strength display.
2
1,3
 previous next