Roberts Radio RD-27 Radio User Manual


 
17
Headphone socket
A 3.5mm Headphone Socket located on the rear of your radio is
provided for use with either headphones or an earpiece. Inserting a plug
automatically mutes the internal loudspeaker.
IMPORTANT: Excessive sound pressure from earphones and head-
phones can cause hearing loss.
Display backlight
1. The display backlight will be switched on for approximately 12
seconds when any button is pressed. (If using battery source)
2. When your radio is powered by AC mains the display backlight will
always be switched on.
Line out socket
A 3.5mm Line out socket located on the rear of your radio is provided
for connecting the audio signal to an external amplifier. Inserting a line out
audio cable will not mute the internal loudspeaker. Set the volume control
to minimum if desired.
RD27 Issue 3.pmd 1/25/2007, 10:00 AM18