Filter
Top Products
11
Operating your radio - FM
1. Carefully extend the telescopic aerial.
2. Press the On/Off button to switch on your radio. The display will
show "Roberts DAB digital radio" for a few seconds.
3. Press the FM/DAB button to select the FM band.
4. Press and hold down either the Up or Down buttons until the
frequency in the display begins to change rapidly. Release the
button. Your radio will scan the FM waveband, stopping each time
it finds a station of sufficient strength.
5. After a few seconds the display will update and show station name.
6. To find other stations press and hold down the Up or Down button
as before.
7. When the waveband end is reached your radio will recommence
tuning from the opposite waveband end.
8. Adjust the Volume and Tone controls to the required settings.
9. To switch off your radio press the On/Off button.
3
8
8
8
9
2
4
4
RD27 Issue 3.pmd 1/25/2007, 10:00 AM12